• 47364232 DEF pump inlet connector
1 1

CASE

47364232 | DEF Pump Inlet (Suction) Connector | For Case IH® Engines

47364232 | DEF Pump Inlet (Suction) Connector | For Case IH® Engines

$46.00 USD
$46.00 USD
Sale Sold out
Shipping calculated at checkout.
  • FAST Shipping & No Duties
  • Overnight Shipping
  • Easy Return & Warranty

We Pre-pay all Duty, Customs and Brokerage Fees !

Speak to an Expert: Call 1-587-438-8819

Shipping Policy & Expectations

Fast Shipping: We aim to ship all orders the day they are received. Shipping cut-off time is 1PM MST.

Overnight Shipping: Offered but not guaranteed. Delays may occur due to carrier or other external factors.

Shipping Carriers: We use DHL, UPS and Purolator. Delivery times depend on their operations and may vary.

Cross-Border Shipping:

We prepay all Customs duties and brokerage fees.

This simplifies delivery, reduces delays, and saves you money.

Customs inspections may still cause unforeseen delays.

Lost Packages:

If your order is lost, we’ll replace it at no cost to you.

Need Help? Contact our customer support team if you experience delays or have any concerns. We’re here to help.

Warranty & Return Policy

Returns:

  • 7-day return window from the date of delivery.
  • Parts must be unused and in original, unopened packaging
  • No returns after 7 days.
  • You may be subject to re-stocking fees.
  • Shipping charges, duty fees, brokerage fees are non refundable.
  • If your part fails under warranty, we will provide a replacement, not a refund.

Warranty:

  • 1-year warranty on all parts installed by qualified professionals where procedures applicable are followed. We may require documented proof of installation procedure.
  • Shipping costs are not included in the warranty coverage.
  • If a part fails under warranty, we offer a repair or replacement first. If a replacement isn’t possible within a reasonable time, we will refund the part’s cost.
  • DEF Pump warranties require documented proof of maintenance (cleaned tank, replaced filters, and verified installation by a technician). The vast majority of pump failures are due to poor maintenace and contaminated fluid.
  • If your part fails under warranty, we will provide a replacement, not a refund.

Liability:

  • We are not liable for incidental damages (downtime, labor, lost revenue, etc.).
  • Buyers assume responsibility for proper installation by a qualified professional. Simply replacing parts without a full understanding of the nature of the original failure typically leads to subsequent failures.

Read the full warranty policy Here

Call / Chat with an Expert

Customer Support: For any questions or support, reach out to our dedicated customer service team via email at support@aftertreatmentparts.com or call us at +1 (587) 438-8819.  We provide support early in the morning, all day - and even during the evenings, if someone is available.  

Product Overview:
DEF Pump Inlet (Suction) Connector PN 47364232 (Bosch F00BH40238) is a replacement suction-side fitting for DEF supply modules (dosing pumps) used on Case IH® engines and equipment. It installs in the inlet port of the pump and connects the DEF supply line from the tank to the pump.

Key Features:

  • Direct Replacement: Replaces Case IH 47364232 and Bosch F00BH40238.
  • Wide Cross-Reference: The same Bosch inlet connector is listed under CAT, John Deere, Perkins, Hino, Case IH, Iveco, Nissan and AGCO / Fendt part numbers (see below).
  • Sold Individually: One inlet connector.

Compatible Connector Numbers: Case IH 47364232, Bosch F00BH40238, CAT 423-3251, John Deere RE549603, Perkins T400379, Hino S17M0-E0010, Iveco 5801696035, Nissan 20454LC40A, Fendt V837079428, AGCO SISU Power 837079428

Note: CNH lists 47364232 as a "Seal Service Kit" for the DEF supply module. Please confirm your CNH parts book listing before ordering.

Installation Notes:

  • Torque the connector to 4.5 N·m (40 in-lb). Do not over-tighten.
  • Inspect the O-rings and replace them if they are damaged.
  • The inlet connector is not interchangeable with the backflow (return) or outlet (pressure) connectors. Please verify your part number before ordering.

View full details

FAQs

What are aftertreatment parts, and why are they important for my equipment?

Aftertreatment parts are essential components designed to enhance the performance and environmental compliance of heavy machinery, particularly engines. They play a crucial role in reducing harmful emissions and ensuring that your equipment meets stringent emissions standards. By installing high-quality aftertreatment parts, you can optimize your machinery's efficiency, prolong its lifespan, and contribute to a cleaner environment.

What benefits can I expect from using Aftertreatment Parts products?

When you choose Aftertreatment Parts, you're choosing superior quality and performance. Our products are designed to improve fuel efficiency, reduce emissions, and enhance the overall reliability of your equipment. By incorporating our aftertreatment parts into your machinery, you can experience increased power, reduced downtime, and compliance with emissions regulations. Whether you're seeking enhanced performance or a more environmentally friendly operation, our products are engineered to deliver outstanding results